An affordable and efficient board edger is what many sawmill owners want the most. Now there is one!
With a board edger you will significantly increase your production, no matter if you have a Logosol Sawmill, a band sawmill or a circular sawmill. Handling timber becomes more efficient and rational when finishing roughedged boards in a separate machine. Set the desired width and send the timber through the edger. A quick and easy operation.
A machine stand is available for stationary installation of the twin-blade board edger.
Its design, with one circular sawblade coming from above and one from the machine table, gives a controlled sawing process. The project board is pressed against a long straight edge after the fixed sawblade. This aligns the board and gives very straight cuts.
The integrated feeder consists of two big serrated feed rollers, which both pull in and feed out the workpiece from the machine. The feed rate is 10 m/min, which is exactly what you can manage. If you wish to increase the speed the gear can easily be replaced.
Unlimited width of the workpiece
The circular sawblades can be laterally adjusted from 30 to 210 mm, but the workpiece can be much wider than that. When the machine is open on one side of the machine table, there is really no limit to how wide boards you can edge.
The board edger is primarily used for edging boards that come from the outer parts of the log, and they are normally under 30 mm. By limiting the cutting height, you can use smaller circular sawblades and motors. This gives low operating current, which can be of great importance when running your sawmill on the same fuse.
We think that this twin-blade board edger is the missing piece for you as a small-scale sawyer, the missing piece that will help you work efficiently.