27 - 31 May
VENEER SPLICING MACHINE MODEL LINEA 1000 for glue-spliced joints This machine permits the longitudinal splicing of veneer sheets, the edges of which have been previously glued.LINEA 1000 provides feeding and splicing of the veneer : the joining is obtained by heating device.Accurate adjustment devices permit the best working mode according to speed, temperature, glue, thickness of the veneer.VENEER SPLICING MACHINE WITH INTEGRATED GLUEING UNITMODEL LINEA 1250 PLUSThe machine permits the longitudinal splicing of veneer sheets by applying glue on their edge. Immediately afterwards the veneer will be passing through a heated zone in order to activate the glue reaction: the glue will be hardening thus bonding the veneer sheets. The integrated glueing device allows the joining by one only process.It's also possible to bond pre-glued veneer sheets.Accurate adjustment devices permit the best working mode according to speed, temperature, glue, thickness of the wood.
The machine permits to cut veneer tapes, paper or PVC, available on rolls, in order to obtain spools of narrower width.
The machine is supplied with:
- unwinding ...
VENEER WASTE COMMINUTING
It permits to comminute the veneer waste due to the veneer working, by cutting in small size pieces the long veneer strips.
It's a simple use press to mount drawers
with steel sides.
Thanks to a practical system of locating stops,
you can position in the machine the drawer components: ...
Our machine allows you to obtain housing for hinges and the relevant
fittings to insert them. Thanks to this versatile device, even small companies
can save time, ...
This machine allows the simultaneous cross-cutting on both veneer pack sides and automatic measuring of veneer pack length. Accordingly programmed, it allows obtaining ...
The machine permits to obtain from the veneer pack any polygonal geometrical figure.
knife beam and pressure beam
hydraulically driven; ...
The machine Mod. NG permits to finger joint two veneer strips,
already lengthwise trimmed.
The finger jointing is obtained by cutting with knife and counter-knife
Z650 - Z650/i
These models are suggested to joinery workshops or companies
where joining operation is not full-time required.
Thread heating is by electric resistance.
Our machine permits high precision application of the glue on the edges of veneer bundles.
The veneer is placed vertically, with one of the two trimmed sides on ...
Cutting and trimming machine for veneer packs, sturdy electro-welded structure, high rigidity under bending and torsion stress, reduced overall wide dimensions thanks ...
Our hydraulic veneer pack guillotines allow, with a single operation, the parallel cut of the veneer pack on both sides. The trimming of the veneer pack is carried ...
Guillotines with pressurebeam and specially designed sturdy structure demanded by the power and the speedy required when cross-cutting veneer packs.
These machines are specially designed to offer, thanks to
the original constructive solutions, advantageous features to those
companies having a small ...