LIGNA 2019, 27 - 31 May
Homepage>Exhibitors & Products >Chip Separation

Chip Separation

Measure before it costs

GreCon Greten

Exhibitor details
Logo Chip Separation

Exhibition stand

Hall 26, Stand C42
Open Exhibition Grounds map

Product description

Contaminated wood chips can cause numerous problems in downstream production processes. Nails can damage the steel belt, and rubber particles
impair coating.

The CHIPINSPECTOR separates foreign objects so that high panel quality and significant savings of material and production costs are achieved. foreign objects are even identified in material layers of up to 50 mm.
Materials of the same weight per unit area, such as wood and rubber, can also be reliably distinguished. The risk of contamination of the panel by rubber particles on the panel surface is significantly reduced

Product website

All products offered by this exhibitor

Fire protection of particle boards

Particleboard is the wood based panel type which is used the most worldwide. Especially for the contruction of furniture and interior work, the panels, that consist of three to five layers of different chip sizes, have constituted the standard wood based panel type for a long time. However, the production more

Fire protection of MDF Productions

Fire protection in the mdf productionread more

Foreign Object Detection

Measure before it costsread more

Chip Separation

Measure before it costsread more

Fibre Measurement

Measure before it costsread more

Forming Optimisation

Measure before it costsread more

Moisture Measurement

Measure before it costsread more

Weight Per Unit Area

The weight per unit area gives information on the amount of the material used. If the weight per unit area is too high, valuable material will be wasted. If it is too low, severe quality defects can occur (internal bond and screw holding capacity). Benefit The material quantity can be optimised and more

Raw Density Profile

The raw density profile is an extremely important parameter in the production of fibreboard. If the profile does not correspond to the optimum shape, this will have serious effects on the panel qualities (e.g. internal bond). Benefit By continuously monitoring the raw density profile, the production more

Weight Measurement

High Precision Scale with X-Ray Technology HPS 5000 The HPS 5000 is the board scale with the H-factor! With high resolution, each mm² of the board surface is measured. Due to the overall measurement, any deviations, fluctuations and tolerance deviations are shown immediately and can be retrieved via more

Surface Quality

SUPERSCAN A high surface quality of panel-shaped materials is pre-condition for a high-quality product. This also applies to materials that are coated. Surface defects have to be detected as early and accurately as possible to avoid expensive faulty production and customer complaints. Manual inspection more

Temperature and Gas Pressure Analysis

Temperature & Gas Pressure Measurement Wireless in Your Hot Press CONTILOG Optimise your pressing process by measuring the development of gas pressure and mat temperature in any position within your press. The CONTILOG is an online sensor, by means of which the parameters, such as gas pressure and temperature more

Formaldehyde Analysis

The formaldehyde emission of wood based panels is subject to legal regulations. High emissions are unacceptable and can cause serious quality defects. With the new stricter regulations, existing measuring methods are often unable to provide reliable information. Benefit The reliable and exact measurement more

DMR 6000: thickness measurement

For the production of wood based panels, fluctuations in panel thickness and deviations from nominal values reduce quality. Your customers will identify these as product defects. Due to their highly developed technology, the new Thickness Gauges DMR 6000 and DML 6000 by GreCon provide the necessary information more

Stored items


Server communication error: Item could not be saved.