27 - 31 May
In cyclones, the majority of the material is extracted from the crude gas and separated in the collection tank after introduction of the centrifugal force. In the event of high material loads in the crude gas, a cyclone can be used as a pre-separator prior to a filter system. This increases the service life of the filter medium.
Basically, cyclones do not require maintenance, and are thus very cheap to operate. However, there is no residual dust guarantee for cyclones.
The CLA type cyclone is designed for use with large quantities of air (185.000m³/h) at relatively low pressure (up to 200mbar)
The CDL type cyclone is designed for use with smaller quantities of air (18.000m³/h) at high pressure (800mbar).
Our explosion relief valves (patented protective system) are available for individual requirements, and can be integrated and/or installed at low cost in existing ...
ceATec has a variety of separator systems. We are able to provide separator systems for the wood and timber product industry, as well as the stone-earth-cement sector.
Rotary feeders are used to separate system areas with different pressures from each other or from the atmosphere. They are always needed whenever material needs ...
In recent years, the availability of systems, along with the environmental requirements for producing wood and fibre plates, has increasingly become a priority. ...
Impulse filter is the term used to designate filters where the filter tubes or cartridges are cleaned by impulses of pressurized air.
Air containing dust flows ...