The press FLUID 2200x1500, which uses a liquid at high pressures, is expressly designed for processing of tackle with thermoformable materials (PVC- PVC High Gloss) and wood veneers.
The machine cycle is divided into several phases handled by plc (vacuum, pressure, pressing of stabilization, etc.).
All phases of the cycle are adjustable from the control panel (video toch screen);
the press is equipped with a electronic sensor to control the membrane.
In case of accidental puncture of membrane , the working pressures are canceled automatically without creating dangerous conditions for the operators.
temperatures are controlled by sensors with digital control.
All the various phases of the machine are adjustable so as to obtain the best working condition for PVC High Gloss and more different materials ( standard PVC and veneers).
The hydraulic design of OMC has been designed and tested on a pressure of 50% above the actual working pressures for safety and reliability of the machine.
The press described above FLUID may have an additional section processing for the curved panels.
Section Called OPTIONAL DOUBLE CURVED AIR fluid.
WITH THE OPTION cited PRESS CAN WORK WITH FLUID IN THE LOWER MEMBRANE with advantages of low temperatures and high pressures for gluing and a better quality CURVED PANELS WITH DIAPHRAGM AIR IN THE UPPER PART with a depth of 250mm max (depending on the modular chamber ordered during the purchase of the machine. CHANGE WORKING LIQUID / AIR CURVED IS FIXING THE SPECIAL TANK TOP with special clamping in the upper base of the press