27 - 31 May
Traditional sawing using new technique
The efficiency and the operational reliability of Logosol Laks frame saw make it belong in a class by itself. For 20 years the frame saw has become more and more improved, not by adding more technology and more smart functions, but by making small adjustments of the frame angle, the flywheel and the mechanical feeding. This has rather led to the machine becoming more genuine.
The heart in the frame saw is the frame with up to twenty sawblades that are pulled up and down with a balanced flywheel as a counterweight. The frame, the flywheel and the mechanical feeding work in perfect harmony, and this can be observed when it is sawing. The sound level is low and reminds of a puffing steam locomotive.
Timber cants are the raw material
Many small-scale sawyers who today use a circular sawmill, a band sawmill or a Logosol Sawmill can reach industrial capacity with the help of the Logosol-Laks frame saw. The logs should be sawn on two sides before they are fed into the Logosol-Laks frame saw so that the lumber is edged before it is cut into boards. This gives a controlled process and minimal handling of the lumber. Without ado the cants are turned into sawn products.
Pleasant on the working site
The environment around the sawmill is pleasant. It is neat and tidy. What little sawdust that comes from the thin blades, is transported away by a relatively small sawdust extractor. An additional nozzle vacuums the top side of the cant so that the boards become completely clean after they have been sawn.
The frame saw is seldom the bottleneck
The Logosol-Laks frame saw relentlessly works away, without interruption or trouble, hour after hour. To keep it working, the sawn boards have to be carried away, and a new cant has to be sawn within only a few minutes. In practice, the Logosol-Laks frame saw is, despite the low feed rate, in almost every case the quickest on the working site.
The blades are replaced quickly!
We have bandsaw blades for your bandsaw
Fit professional sawblades in your bandsaw and experience the difference. No matter what bandsaw you have, you will find ...
All you need for your planer/moulder
A good assortment of knives is an important factor if you want to make a profit on your planer/moulder. Being able to deliver ...
No resetting between jointing, planing and moulding
Use the jointer on the upper machine table, and then plane two sides on the lower table, entirely without ...
Vertical milling machine with features
The multi-moulder MF30 is a vertical milling machine out of the ordinary for milling against fence, end and side milling ...
An affordable and efficient board edger is what many sawmill owners want the most. Now there is one!
With a board edger you will significantly increase your ...
Logosol PH360 - Industrial power in a sleek format
A stable four-head planer/moulder for professional production. This completely new machine has its place in ...
Stack Cutter PK1500
Cut board stacks cost-effectively - with impressive precision.
The stack cutter cross-cuts board stacks with great accuracy. The 150 cm, 135 ...
Band Sawmill LM Pro - An entirely new sawmill that packs professional capacity.
Logosol Norwood LM Pro MX34, known as the LumberMate Pro in North America and ...
Logosol M8 - The Swedish Portable Sawmill
With the Logosol Sawmill M8 you can quickly produce high-class planks and boards from your logs, in the length and ...