27 - 31 May
C.M. MACCHINE has designed TIN 600 to IMPREGNATE WOOD BEAMS and WOODEN PROFILES both with WATER and SOLVENT BASED products.
Automatic machine for the painting on four sides, trusses in wood, beams lamellari, perlinati, elements of prefabricated houses and every other type of element in wood of small and averages dimensions
BASIC MACHINE COMPOSITION TIN 600:
MACHINE STRUCTURE in heavy welded mechanical carpentry with high resistance and stability. The machine is sprayed with special painting resistant to the chemical products used in this process. The wood piece transportation through the machine is carried out by means of motorized (speed adjustment by inverter) with all transmission parts placed outside the machine tank protected from the painting contact.
SPRAYING SECTION with nozzles having an individual closing device placed on the machine front to select the painting surface in an easy way.
The impregnating solution circulation is granted by a self priming pneumatic membrane pump.
AIR BLOWERS to clean the tonguing.
FILTERING SYSTEM made of three devices placed
VARIABLE SPEED BRUSHES counter - rotating with a FAST BAYONET UNHOOK SYSTEM. The brushes position is alternate in order to have a better painting distribution on the wood surface avoiding spots and slobbers.
ALL BRUSHES GROUPS (one group two brushes) are equipped with and INDEPENDENT MOTOR and have a stainless steel shaft.
Maximum piece height mm 600
Maximum piece width mm 450
Minimum piece length mm 800
Machine working speed m/min da 8 a 40
Machine Length mm 3000
Machine Width mm 1500
Machine Height mm 2100
Machine weight kg 1200
C.M. MACCHINE has designed and built SKAUT to create automatically the effect of hand planing on elements of beams, plates, beads and wooden floors.
The key feature ...
C.M. MACCHINE has designed RTI 400 to brush and give aged and rustic finishing to small wood BEAMS, wooden PROFILES, PAVEMENTS etc.
SPECIAL ABRASIVE BRUSHES treat ...
C.M. MACCHINE has designed and manufactured FT300 for crosscutting and end-tenoning parquet slats of random lengths and for making high-precision tongue & groove ...
C.M. MACCHINE has designed and developed the NEW HPXO for the laminated beams making.
HPXO mills; glues and joints different pieces to reach a pre-defined lamella ...