LIGNA 2019, 27 - 31 May
Homepage>Exhibitors & Products >KEB COMBINORM - Electromagnetic clutches and brakes

KEB COMBINORM - Electromagnetic clutches and brakes

KEB Automation

Exhibitor details
Logo KEB COMBINORM - Electromagnetic clutches and brakes

Exhibition stand

Hall 16, Stand E05
Open Exhibition Grounds map

Product description

From 0.5 up to 750 Nm.
Single surface elements with asbestos-free friction lining for zero-backlash torque transmission without residual torque and short switch times.

Product website

All products offered by this exhibitor


- Single Axis Drives - KEB COMBIVERT F6-K is controlled and regulated drive technology ready for the networked world - designed 13849-performance level 62061-SIL 3 in a kit, consisting of seven physical sizes with integrated security STO ISO e / IEC. The devices are highly compact designed and more


The operation of variable-speed drives with intermediate voltage circuits puts stress on the mains and motor, which can be optimised with the following additional measures (depending on the place of use and type of application): Mains Mains chokes reduce harmonics to the mains and increase the service more

KEB COMBIGEAR - Servo gear motors

Compact, efficient, high-performance at fine gradation: More dynamics, higher efficiency factor, lower weight - three convincing arguments for the use of synchronous motors. Our product range covers nominal torque rates up to 100 Nm in five frame sizes. The motors have been designed for voltage classes more

KEB COMBIGEAR G and ZG - Inline hlical gear motors

0.12 - 45 kW Universal installation, minimal backlash clearance, long-lasting: The flange or foot-mounted version of this two- and tree-stage series supplies output torques up to 13,000 Nm. Fine speed resolution up to 1.2 rpm provides optimum torque adjustment at the output more

KEB COMBIGEAR - Shaft mount gear motors

0.12 - 45 kW Lean on the shaft: This series, which is available in seven frame sizes, delivers torques up to 9,000 Nm and a minimum output speed of 1.3 rpm. Gears and motors are directly integrated, resulting in equally robust, space-saving and longlasting machine drive more

KEB COMBIGEAR K - Helical bevel gear motors

0.12 - 45 kW Highest efficiency factor at the angle. The rigid bearing of the shaft or hollow shaft transmits high radial forces even during alternating load conditions and allows for output torques of up to 12,000 Nm. This series is designed for applications with the highest efficiency factor - including more

KEB COMBIGEAR S - Worm gear motors

0.12 - 7.5 kW The better standard drive: Long life-time, various installation design option and models with shaft, hollw shaft and flange turn this series into the ideal standard drive for applications with low motor speeds, good efficiency factor and torque up to 1,200 more

KEB COMBINORM - Electromagnetic clutches and brakes

From 0.5 up to 750 Nm. Single surface elements with asbestos-free friction lining for zero-backlash torque transmission without residual torque and short switch more

KEB COMBIPERM - Permanent magnet brakes and clutches

From 0.4 up to 145 Nm. High temperature resistant SmCo / NeFeB magnets for large brake torque with small frame sizes for the zero-backlash maintaining of attained positions. Residual torque free disconnection with large maximum air gaps and wide release window more

KEB COMBIBOX - Clutch-brake combinations

From 7 up to 250 Nm. Installation-ready clutch-brake combinations for start/stop operations in a housing. The patented air gap adjustment method allows for subsequent wear and tear readjustments without more

KEB COMBISTOP - Spring-applied brakes

From 1 up to 3,000 Nm. Dual surface brakes with setting and readjustment of air gap. Asbestos-free friction linings with steel insert guarantee maximum security and protection even under extreme stress. The special geometry of armature and magnet creates considerable wear and tear more


The unit series covers a complete program of frequency inverters und servo systems in the power range 0.37 ... 900 kW, available in the voltage classes 230, 400 and 690 V. Designed as flexible modular system, the extensive requirements of the modern mechanical and plant engineering can be operated more


The further development of the product line drive-oriented motion control uses in the future CoDeSys version 3 as universal tool for the programming of the automation system in the languages of the IEC 61131-3. COMBICONTROL is available in different performance levels with embedded and IPC solution. Compact, more


Multi-axle drive system with integrated automation The new multi-axle system includes an embedded control, which is connected to the main level or visualization typically via Ethernet, acting as fast real time EtherCAT master for the axle concerning torque, speed and position control, motion control more


Integrated flexibility and high functionality are the emphases of this inverter program which consists of three physical sizes. The program is designed for sophisticated tasks in the machine and plant engineering from 0.75 up to 30 kW. Easy handling with integrated plaintext LCD display, quickly start-up more

Stored items


Server communication error: Item could not be saved.