27 - 31 May
The PSD on-line Press Security Device, has been designed to meet the ever increasing need for panel manufacturers (particleboard, OSB and MDF) to identify in the formed mat, impurities such as tiny pebbles, stones, metal and other high density foreign bodies like plastic and lumps of glue from the wood. Real time detection and elimination of these impurities at pre-press outfeed, especially in the case of thin panels, will protect and safeguard press and steel belts.
The device is also able to measure the density distributed over the entire width of the mat. This measurement is essential for correcting forming density distribution and consequently for optimizing production quality and reducing costs related to excess material at the same time.
Highly sensitive, accurate and reliable sensors, specially designed for the application, pick up the signal to produce a clear and well-defined image of the mat, which is then rapidly and accurately processed real time by special DSP devices to identify the particles of a different density to that of wood fibre, and to provide the means for the selective elimination of the particle detected.
Dosing systems for the production of particleboard, MDF and OSB panels.
900 gluing systems installed worldwide
Glue blenders for the production of particleboard, MDF and OSB panels.
1600 blenders installed worldwide
The WINBLICK system has been designed to measure thickness, weight and density of wood-based panels on line, as well as to detect any defects inside the board (particleboard, ...
We may offer a wide range of laboratory equipment as :
- IB600 board property tester
- IBX700 board property tester and density profile analizer
- Swelling ...
The FBC200 has been designed to detect unglued, delaminated, blown or low density areas, bubbles, cracks and other flaws inside any type of board (PB, MDF, OSB or ...
The unit has been designed to perform the on-line density profile analysis on wood based panels while the production process is in progress.
The system exploits ...
The purpose of the Imal Dynasteam® is to inject a continuous pre-set quantity of steam onto the top and bottom surface of the mat, as it is fed into the press.