27 - 31 May
SPINDLELESS VENEER LATHE for log core peeling.
Sizes 1,400; 1,800 and 2,700mm.
Log core initial/final diameter: 270/45 mm.
Optional: Rotary Clipper and conveyors.
We produce DRUM SANDING MACHINES with the follwoing sepcifications:
Max. sanding width: 1300; 1800 and 2000mm
Max. sanding thickness: 3 mm
min. Sanding lenght:300 mm
variabe speed: 15-30m/min.
Transport rollers for heavy loads supplied in 3m modules. Each module with 20 roll and each roll with 150mm length and 90mm diameter, with two 4' «U» profiles, super reinforced.
We produce GLUE MIXER with a capacity of 100 or 500 liters.
We produce GLUE SPREADER for a uniform and precise distribution of the glue over one or both surfaces of veneers and panels.
Model standard: 1350; 1800 and 2700mm
With universal joint drive and 380 mm diameter rolls.
Working width: 1,350, 1,800, 2,700 e 3,300 mm.
Optionally with variable speed.
HIGH PRODUCTION DOUBLE SIZER with cutting speed up to 90 m/min.
Enables direct coupling to the sanding machine.
Cutting sizes: 4' x 8', 5' x 10' and others.
Equipped with thickness detector, defect Clipper, string and glue applicators, Clipper for full size veneer and automatic stacher.
Sizes 1,350, 1,950, 2,700 and ...
Equipped with sensors for defect clipping, improves veneer recovery with square clipping and is safer for the operators. Sizes: 4', 6' and 8'.
Full automatic line consisting of: Feeder; Ionizing bar; lay-up conveyor, loader and unloader vacuum truck; Turner / cooler device and Stacker;
Pressure up to ...
For 6 to 31 plates of 4' x 8; 5' x 10' and others.
With pressure up to 20 kg/cm².
With automatic loader / unloader.
With optional automatic paper application.
For veneer or «finish-foil» paper overlaying with one or more daylights.
Specific pressures of 6, 10, 15 and 20 kg/cm².
Plates sizes: 2.000 x 3.000; 2.000 x 6.000; ...
We produce COLD PRESS with the following specifications:
- Opening of 1200 mm or under order;
- Table size: 135 x 2700; 1800 x 2700 mm;
- Specific Pressure: 8, 10, 12, 15 20 bar and others..
We produce multiplates press with automatic loader / unloader.
Rigid one-piece machined frames;
Plates size acoording project;
Specific pressures from 10 to 40 bar;
Heating by steam, hot water or thermal ...
To sort and stacker veneer sheets thickness from 1,5 up to 5,0m.
Speed up to 150m/min.
High capacity dryers with low energy consumption.
Equipped with cross feed charger for the loader, automatic loader, automatic temperature control and air drying ...
The system with heavy stainless steel screens, internal curves and pressure upper rolls dries the veneer with «ironing» effect.
Capacity from 1.000 to 7.000m²/h.