27 - 31 May
Pizzi by PGS
0165/0265 - pneumatic equipments for metered delivery of glue, with A12 tank in stainless steel, with one or two pneumatic guns. This is a unique solution to apply always the same amount of glue. Ideal for dowels, holes, slots (chairs), tenons and mortises for windows and doors. For small batches and mass production, where accurate and constant glue dosing is requested.165DF - Gluing system for the application of PVA with dual function for the setting of the glue flow (manual and metered). With one or two pneumatic guns, PLC controlled, and with two glue feeders A8 (for glue and water for the cleaning equipment). When the operator works with the metered function, he applies always the same amount of glue; when the operator works with the manual function, a continuous stream of glue will be extruded. For small batches and mass production, where a flexible and easy-to-use gluing machine is needed.
X-Press is a professional tool, specific and necessary to apply an even pressure on laminate sheets, veneer and similar onto flat surfaces, panels in general etc. ...
Hand-held glue spreaders, widths 72/120/150/180 mm.
With rubber, sponge or PUR-rollers. Rubber rollers can be used for most surfaces, they are stronger (so lasting ...
A8 Range: pneumatic glue feeders in steel, 8 Kg. capacity for the internal canister, with one, two or three glue guns.
A5/A12/A20 Range: pneumatic glue feeders ...
9810 - Pneumatic glue feeder in stainless steel for solvent-based contact adhesives, 12 Kg. capacity for the internal canister, with one glue gun. Ideal to apply one-component neoprene glues.
1094 - Pneumatic glue feeder in stainless steel for the spraying of adhesives and paints, 12 or 20 Kg. capacity for the internal canister, with one spray gun and ...
890PU - Pneumatic glue feeder in stainless steel for PU glues, 12 Kg. tank, with one glue gun. This highly innovative system, that we call PURBOY, works with a 5 ...
Glue-spreading machines with fixed heads for PVA glues. They need no electrical connection as they work pneumatically only. With two or four heads and equipment ...
Easywin is a processing center with three axes controlled by a brushless motor, for drilling, both on the front side or on the edge of the wood piece. The CNC system ...