27 - 31 May
High efficiency by wet cleaning
Wet type electrostatic precipitators are used where aerosol-solid mixes have to be separated with high efficiency. Today wet type electrostatic precipitators with a high cost-benefit ratio are considered especially for separating:
Our plants are characterized by a number of outstanding properties:
high separation rate, with clean gas solid content up to < 1 mg/m³
optimum spray water input for saturation of gas and for complete wetting of the separation area
effective interval flushing of the separator and precipitator bottom
complete pumping system for circulating water and waste water
minimum consumption of fresh water
optimum corrosion protection by using of stainless steel or FRP
Production of MDF, OSB
EWK Environmental Engineering has been manufacturing systems for the purification of air and waste gases for years.
The SCR (selective catalytic reduction) methods ...
Fabric filters are an alternative to dry type electrostatic precipitators and are suitable primarily for dry dust. Adressing individual operating conditions:
Although scrubbers are among the simplest dust arrester, they can be used in a multitude of applications. They do not only serve as dust removers, but are also used ...
The use of techniques, which separate the emissions absorbed by the liquid is necessary for wet waste and process gas purification systems.
Whether pre-purification, ...
Dry type electrostatic precipitators today are considered the most economical system for solving dust collecting problems, as any dry dust generated can be disposed ...
By integrating water/water or water/air heat-exchangers into the absorbent cycle of the scrubber it is possible to transfer large amounts of usable heat energy from ...