27. - 31. Mai
The Densimetric Separator combines two physical rules - vibration and blowing effect - in order to well separate heavy contaminants from wood particles.
The material is introduced through the upper part of the machine by a special hopper on the densimetric table. The material is distributed on the whole surface of the table to effect a suitable and freely controllable air pressure in the deposited material that generates a type of bubbling that provides effective densimetric separation.
By applying an oscillation to the inclined screen, the heavy materials placed on the screen rise towards the top and therefore into the fitted contaminated waste hopper, whereas the lighter materials (wood) slide towards the bottom of the hopper that collects the clean materials.
Depending on the different types of material to be processed and the degree of cleanliness to be obtained, there can be set 3 main parameters. These parameters are easily adjustable by the operator by using a programming keyboard and a display on the electric panel of the machine.
The densimetric table is composed of an aluminium frame with net, that is easily dismantled to rapidly change and clean. The cleaning interval depends on the type of material processed and the type of present contaminants.
Because of the air supply, the material does not pass through the screen. The mesh size is chosen according to the type of processed material.
A fan is installed within the machine to autonomously take in fresh air from outside through a removable filter panel.
- Excellent removal of heavy pollutants from recycling wood
- Excellent removal of sand from fines and dust
- Separation of heavy pollutants from dry materials, i.e rejects from SL & CL Separators
- Flexible adjustment for efficient removal of sand, stones, metals, plastic, rubber, glass, laminates, etc.
- No deposits into the combustion chambers due to clean dust
- Drastic reduction of wearing into fan impellers, pipe bends
Instalmec has developed a new screening device capable of an enhanced sifting capacity with respect to traditional screens. This system works very effectively even ...
After years of research Instalmec has created a great solution for cleaning wood in the dry area of the plant. Such solution is suitable for both virgin and recycled ...
After one and a half year of research carried out in its laboratory, Instalmec has developed a new, more efficient Disk Roller Screen. The aim of this innovative ...
Improvement on dryers to increase the drying capacity, to improve the quality of the particles and to eliminate the high costs of maintenance.
1. Improved dust ...
Taking advance of its long experience in the world of dryers for wood particles, Instalmec offers to retro-fit existing old dryers with state ...
Wide experience in panel board technology allows INSTALMEC S.r.l. to be on the market with complete, reliable and cost-effective drying units, provided with innovative ...
Rotary valve type CC:
Suitable for high pressure applications, high filling factor. Wear proof execution, inlet and outlet
Provided with steel knife, extra-heavy ...
Instalmec features almost two decades of experience in the design and construction of Plants for Pellet production.
We offer custom-made solutions according to ...
The silo is a structure used for the storage of bulk materials. It is used in various industrial sectors for the storage of various materials like sand, cement, ...
Instalmec dosing bin is equipped with a number of extracting screws (special design) calculated in function of its dimensioning. For each screw, moreover, there ...
INSTALMEC installs filter type FAC for the pneumatic conveying system.
These filters are very simple, suitable for continuous operation and they require very low ...
Wide experience in different industrial branches allows INSTALMEC S.r.l. to be on the market with complete, reliable and cost-effective suction and de-dusting units, ...
Pneumatic conveying is increasingly used for the handling of bulk powder or granules of various kinds. Among the countless advantages of pneumatic conveying there ...
General suctions system and the pneumatic conveying for particle-board and MDF lines.
Upright construction reduces significantly the floor space ...
The exhaust gas extraction system is installed on the continuous press in charge of panel production in order to minimize the risks of fire.
Indeed, fire might ...
The Metering Bin is installed upstream the forming machine, and it is used to supply it steadily with wood chips or fiber.
The control of the material unloading ...
A complete range of 10 sizes of our specialized resining machines is available to cover fully all your requirements for applying resin to the wood particles and ...
The metering variations are obtained by changing the speed of the metering belt according to the Set value. The gravimetric preparation of the glue mixture is effected ...
The BDB system integrates in only one machine the functions of a perfect metering bunker and of
a continuous scale.
The metering variations are obtained by changing ...
A bunker is foreseen for the storage and loading of the fuel to the combustion chamber. Such bunker continuously feeds a chain conveyor. The combustion chamber ...
The innovative screening system was studied to improve and maintain a constant screening efficiency and to eliminate all the problems arising from heavy oscillating ...
The material to be cleaned is fed through a dosing screw «1» into a water basin where light material floats, while the heavier pollutants such as stones, metals, ...
INSTALMEC's new kinetic separators are a technological evolution for the separation of heavy bodies (sand, stones, glass, metals, wood agglomerates, plastic agglomerates ...
The great family of WPS and DPS gravimetric separators satisfies the required capacity of any plant.
The INSTALMEC gravimetric separator is a simple system but very ...
- High reliability
- Minimizes maintenance costs
- Low specific energy consumption
- Easy replacements of hammers
- Rotor set to rotate in both directions
- thus ...
It is generally known, that 98% of all MDF production lines have a common problem not solvable with traditional separation systems available on the market:
The innovative design of the air outlet, the internal helical scroll (for specific applications) and
the installation of a special finned ...
Wood dust, as main fuel used in the combustion chamber and in the thermal energy plants, due to its high silica content, causes a series of disadvantages:
- High ...
Effective cleaning of wood, no matter its origin;
Clean operating area thanks to suction system in vacuum installed on every machine;
- High productivity and reliability;
Auf der Merkliste