27 - 31 May
NC based machine for preparing the frame and corner joints in building
components. E.g. in window and door production. This machine routers the
dovetail slots (Hoffmann Keys W-1/2/3) and drills the dowel holes from
8mm. Variable positions of the slots and dowel holes horizontally, vertically
or in a combination of both. Moreover the free positioning over the entire
work-piece is possible. Typical example choice would be 2 x dowel holes and 3 dovetail slots. Working capacity over the mitre cut face X direction 210 mmand Z direction 140 mm.
Enter all the component data and processing parameters directly on the 5.7«
colour touch screen panel. Transfer of data via a USB connection is also
available. Programmes can be saved and quickly called up, with 100
programme spaces of routing and boring available. Multi lingual
menu/operator guidance. Simultaneous processing of two work-pieces per
machine cycle. Corner joint with a choice of angle from 0° to 67° or but
joints at 90°. For node connections they are butted and locked.
The perfect Allrounder when it comes to mitred joints: Sawing, Routing and Drilling in one machine cycle. Wide ranging applications for windows, doors, frames as ...
Two clean precision mitre cuts to an exact length in one machine cycle. When both pieces are to be joined together or in a frame, then they can be prepared with ...
Portable and flexible bench-top machine, for routing a single dovetail slot with each machine cycle. Hoffmann Key sizes W-1/2/3/4.
Position the work-piece ...