10 - 14 May
The SAXLUND International chain conveyor is a continous operating machine within a bolted rectangular cross-section casing. It may be arranged horizontally or inclined with bends to suit customer requirements. Our chain conveyors are renowned for their long service life, quiet operation and gentle handling of the bulk solid material.The bulk material is fed in at the inlet/bottom end where the chain tensioning station is also fitted. The conveying chain runs on a special wear resistant floor and conveys the material through the upper or lower section to the discharge opening where it is discharged to a silo inlet or to a following conveyor. The drive station is also installed at this end. The construction type of the conveyor chain is chosen and adapted according to the specific bulk material to be transported. All chain links are manufactured from high grade drop forged steel with welded flights to suit the application.The conveying chain is driven by a chain wheel on a shaft with bearings which in turn is driven by a gear motor with roller chain drive. After material has been discharged, the empty chain returns over the guide rails back to the inlet/tensioning station. The continuous chain passes around the tail drum and back into the conveying mode. The tail drum is located in a spring loaded sliding arrangement with roller bearings. The springs are fitted on both sides and can be pre-tensioned by means of theaded rods. A rotation sensor is also fitted at the tail end.
Saxlund have a long history and experience in the design and construction of screw conveyors. Today we manufacture four main types:Standard SAX ScrewsThese are shafted ...
This system is designed for the continous discharge of bulk materials from rectangular bunkers, large-diameter silos, and open air stockpiles. The TubeFeeder® gently ...
Another silo and bunker discharge machine offered by Saxlund International is the Hydraulic Rotor system. To start its operation slowly the rotor is actuated without ...
The Push Floor is an 'original' discharger design by Saxlund International for square and rectangular bunkers. It is designed to function with non free flowing and ...
The Sliding Frame is an 'original' discharger design by Saxlund International for flat bottom circular silos. It is designed to function with non-free flowing and ...