10 - 14 May
The Coping Center type KF is a machining center for cutting to length, coping and drilling of window profiles for end scribed corner joints fastened with dowels or screws.
The excellent quality of the corner joints is ensured by two counter rotating milling spindles. The machine also drills the profiles for dowels.
The drilling units for the screwed joints and the dowelling unit with dowel conveyor for program controlled glue injection and dowel driving are available as optionals. The flexible concept of the STEGHERR KF allows a large number of machine versions to be offered. With milling spindle power from 4.0 to 7.5 kW, different shaft lengths, tool holders, and two or four tool heights the KF can be specified to produce your windows and doors with speed and accuracy.
By allowing the jointing of pre-profiled timber with perfect splinter free scribes the KF has simplified the manufacture of wooden windows and maintained the classical square shoulder look.
The NC Mitre Saw STEGHERR type GLS-2 can
mitre-cut glass strips, water drainange channels or similar profiles of wood, aluminum or PVC at any angle between +45° ...
Profiled stock is normally coped in one working cycle - across the grain. This often results in tear outs that require time-consuming sanding and patching.
The NC Mitre Saw STEGHERR type GLS for profiled stock can mitre-cut glass strips, weather bars or similar profiles of wood, aluminum or PVC at any angle between ...
The FD-E2 machine is supplied with additional work stations, for:
- drilling dowel holes, incl. glue injection and dowel insertion
- drillings for hardware
The sash coping center type KF-1 is a special machine for the tear free coping of the work piece ends. With its two vertical milling spindles rotating in opposite ...
The KSS machine cuts V-notches in glass strips, water drainage channels or similar profiles of wood, aluminum, MDF or PVC at +/-45°. The saw blades are mounted at ...
The KSF-2E machine can be provided with up to nine work stations. Beside the classic cross joint the machine can perform the following operations:
- End scribing ...
The Special Milling Machine Stegherr BRF is used for the end processing of canvas stretcher bars. The machine can be manufactured in a fully automatic version with ...