10 - 14 May
Profiled stock is normally coped in one working cycle - across the grain. This often results in tear outs that require time-consuming sanding and patching.
The STEGHERR KF-mini station can end scribe the profiled stock by means of two high-speed milling spindles, rotating in opposite directions. The result is perfect profiling! An optional cross cut saw with a fence can be added to the machine for cut-to-length production.
If provided with a swivelling fence and graduation the machine can end scribe bars for angle joints (swivelling range -45° to +45°) which will considerably increase the application area of the machine.
The KF-mini can accommodate SDL bars maximum c. 50 mm wide and 30 mm high. On request the machine is equipped with the suitable coping cutter heads which are custom made to the customer's profile drawings and are adjusted and tested on the machine, so that the machine can ship ready for operation.
The NC Mitre Saw STEGHERR type GLS-2 can
mitre-cut glass strips, water drainange channels or similar profiles of wood, aluminum or PVC at any angle between +45° ...
The NC Mitre Saw STEGHERR type GLS for profiled stock can mitre-cut glass strips, weather bars or similar profiles of wood, aluminum or PVC at any angle between ...
The FD-E2 machine is supplied with additional work stations, for:
- drilling dowel holes, incl. glue injection and dowel insertion
- drillings for hardware
The sash coping center type KF-1 is a special machine for the tear free coping of the work piece ends. With its two vertical milling spindles rotating in opposite ...
The KSS machine cuts V-notches in glass strips, water drainage channels or similar profiles of wood, aluminum, MDF or PVC at +/-45°. The saw blades are mounted at ...
The Coping Center type KF is a machining center for cutting to length, coping and drilling of window profiles for end scribed corner joints fastened with dowels ...
The KSF-2E machine can be provided with up to nine work stations. Beside the classic cross joint the machine can perform the following operations:
- End scribing ...
The Special Milling Machine Stegherr BRF is used for the end processing of canvas stretcher bars. The machine can be manufactured in a fully automatic version with ...