27 - 31 May
This machine is designed to assembling by meaning of hot melt glue a panel door frame.
The product obtained is a perfect squared and rigid structure ready to be stocked or matched with panels before pressing operation.
The machine can be divided in 2 sections: a feeding area and an assembling area.
In the first section there are two lateral stiles stores . At the same time from the two lateral stores a couple of stiles, one by side, goes down on a chain with references that guide it until to the preparation station.
During the transfer, hot melt adhesive glue is put along the stile. (option)
After the preparation of the stile, all the elements are moved to the assembling zone. During the last transfer, the hot melt glue is put on the stiles in the junction points between same rails and stiles.
The operator put the rails and doors lock elements manually into assembling area on reference system. Finally push a ready button to start assembling cycle.
Arriving to the assembling area the stiles are pushed by means of pneumatic cylinders.
The assembling is completed pushing the rails in contact with stiles and keeping the pressure for some seconds.
This line is designed to close in automatic way boxes model
FEFCO 410. The longitudinal flap and the two transversal
flaps of the lid are glued by ...
This machine has been designed for the automatic assembling of inside doors, furniture doors and kitchen doors, in wood or MDF with one or more panels.
The assembling ...
This line has been designed for erecting boxes Mod Fefco 410. The longitudinal flaps are folded within the first station while the transversal ones ( 2 ) are glued ...