27 - 31 May
Z650 - Z650/i
These models are suggested to joinery workshops or companies
where joining operation is not full-time required.
Thread heating is by electric resistance.
The temperature is adjustable by means of a commutator.
The feed speed is constant.
It is available with bench and carriage version
(Mod Z 650/i)
Intermediate model designed to meet the requirements of the companies where joining operation is often required but not demanding particular high production.
In respect to the model Z 650, it allows reducing working time and it
permits higher efficiency thanks to:
- stepless change of feeding speed from 7 to 14 m/min
- possibility to change zig-zag pitch and height
- automatic breaking of thread
- electronic adjustment of the temperature
The machine is supplied with one
thread spool, tweezers, needles and
antiadhesive liquid product.
This model is specially designed for the users requiring high production and considerable working speed also when using difficult materials.
This result can be reached thanks to the complete range of adjustments
on the standard machine:
- stepless change of feed speed from 10 to 50 m/min
- stepless change of heater oscillation angular speed, independent of the
linear feeding speed
- accurate adjustment of the feeding friction pressure
- adjustment of the starting point and stop point
- thread heating by electric resistance
- amperometer on the control panel for an accurate adjustment of the
- zig-zag height adjustment
- automatic breaking of the thread
- all functions are operated on the control panel
The machine is supplied with one thread spool, tweezers, needles
and antiadhesive liquid product.
Compressed air connection is required.
The machine permits to cut veneer tapes, paper or PVC, available on rolls, in order to obtain spools of narrower width.
The machine is supplied with:
- unwinding ...
VENEER WASTE COMMINUTING
It permits to comminute the veneer waste due to the veneer working, by cutting in small size pieces the long veneer strips.
It's a simple use press to mount drawerswith steel sides.Thanks to a practical system of locating stops, you can position in the machine the drawer components: the ...
Our machine allows you to obtain housing for hinges and the relevant
fittings to insert them. Thanks to this versatile device, even small companies
can save time, ...
This machine allows the simultaneous cross-cutting on both veneer pack sides and automatic measuring of veneer pack length. Accordingly programmed, it allows obtaining ...
The machine permits to obtain from the veneer pack any polygonal geometrical figure.
knife beam and pressure beam
The machine Mod. NG permits to finger joint two veneer strips,
already lengthwise trimmed.
The finger jointing is obtained by cutting with knife and counter-knife
VENEER SPLICING MACHINE
MODEL LINEA 1000
for glue-spliced joints
This machine permits the longitudinal splicing of veneer sheets, the edges of which have been ...
Our machine permits high precision application of the glue on the edges of veneer bundles.The veneer is placed vertically, with one of the two trimmed sides on the ...
Cutting and trimming machine for veneer packs, sturdy electro-welded structure, high rigidity under bending and torsion stress, reduced overall wide dimensions thanks ...
Our hydraulic veneer pack guillotines allow, with a single operation, the parallel cut of the veneer pack on both sides. The trimming of the veneer pack is carried ...
Guillotines with pressurebeam and specially designed sturdy structure demanded by the power and the speedy required when cross-cutting veneer packs.
These machines are specially designed to offer, thanks to
the original constructive solutions, advantageous features to those
companies having ...