10 - 14 May
The high frequency technology is used in the many different areas.
HF energy (high-frequency energy) is in an electric field. By means of «dielectric» or «inductive» heating this energy is converted into heat energy.
Inductive heating is applicable only for metallic materials (highly electrically conductive materials). The dielectric heating is only applicable for poor electrical conducting materials. Iner alia is this method for drying and preheating of resin powder, used for the welding of plastic films.
In the wood industry it finds applications e.g. for drying of wood but especially for heating of adhesives. The key advantage of the dielectric heating in relation to conventional heating modes, such as contact, convection and radiation heat, is that they are not depending on the temperature conductivity of the material. Therefore, materials with any volume and cross-sectional dimensions can be heated in a very short time. Is there a body of various components, a selective heating of certain materials (parts) is possible. This advantage has significantly contributed to establishing the dielectric heating in the timber industry. This allows to heat up the adhesive joint and the adhesive is cured without substantially increasing of the temperature of the surrounding layers of wood. The setting time can be reduced to less than 30 seconds.
Following features of the dielectric heating should especially be mentioned:
Immediate heating of the treated materials after switching on the high frequency power - no heat losses
Constant increasing the temperature in nearly homogeneous material. It's not possible to overheat local areas
Various heating of different materials (eg, wood and glue), so selective heating of certain substances are posssible
Due to the special arrangement of the electrodes, individual parts of a body can be preferably heatedwith high frequency
Continuous engineering have made this a state of the art machine, keeping pace with modern methods of application. Sturdy construction, operational comfort and safety, ...
Throughfeed press for boardproduction consisting of:
automatic feed in
cleaning brushing machine
Glue spreader with roller disc way
Beltconveyor table with ...
Efficient and flexible.
Great versatility with regards to the utilisation, characterizes the Koptronic. Use it to press cupboards, drawers, round top frames, designer ...
economical and efficientThe sophisticated and field-proofed machine is made for clean joint cutting of all sorts of veneer and for accurate, splinter-proofed cuts ...
The FSP-V closes the gap between the manual FSP and the automatic FSP. Equipped with an infinitely variable unit feed, the FSP-V combines the comfort of an automatic ...
The newly developed veneer and panel saw FSP-Automatic, has been adapted to suit the requirements of the present-day manufacturing processes. Because of its future ...
Moldings are applied to many various fields. Whether in the timber industry for chair shells, chair backrests, bed springs made out of plywood or in thecomposites ...
The machine that makes the veneer flexible and supple for a variety of applications.
Before the veneer can be flexed, it must undergo heat pressure treatment. ...
The solid timber press MHP is complete when equipped with a loading and discharge system as well as a glue station which, due to the digital workpiece length detector, ...
Economic and flexible - a self-adjusting case clamp that can cope with the tight requirements of continuous line production.
The throughfeed case clamp KOPMATIK ...
Simply professional - the case clamp model KP 2000 in the customary massive, state-of-the-art technical standard is in design and technical details similar to the ...
with infeed- and outfeed-unit
Simplifies the loading of large and heavy workpieces - e.g. door production.
For the optimization for pressing procedures in ...