10 - 14 May
LEUCO offers the first grooving cutter with a cutting width of 8.5 mm for CNC machines. To obtain this width, a grooving cutter 5 mm and two passes have often been necessary. The new grooving cutters of LEUCO can speed up the grooving process and double the edge life of the tool.
The secret of the new grooving cutter is the LEUCO g5-System which is available from LEUCO for different applications and machines. LEUCO now uses this serration for a grooving cutter with a width of 8.5 mm. Thanks to the special tooth geometry and arrangement, the cutting pressure is reduced and, for this reason, also the driving power of the motor. This is why the grooving cutter can be used with motors which are designed to drive grooving cutters of a width of 4 and 5 mm.
Due to the smooth G5 serration of LEUCO, it is possible to produce 8.5 mm wide grooves in a single step also on smaller CNC machines. Using the new g5 saw blade, wide grooves can be produced more quickly. At the same time, the edge life is doubled since the saw blade does only perform one processing step instead of two.
High cutting quality for all coatings
Another benefit of the new grooving cutter from LEUCO is the excellent cutting quality. Solid wood, plastics or varnished surfaces: the grouped profile consisting of 5 teeth each is able to saw wood even with hard or sensitive coatings. This is perfect for grooves in cabinet, showcase or commode parts for the manufacturers of high-quality furniture or furniture parts.
Tools for processing wood
On-site phone: +49 511 89405230
Despite the fact that they cost more to purchase than HW tools, it also makes sound financial sense to use DIAREX DP saw blades on table saws and on vertical panel sizing saws. Over the long term, these are the more cost-effective option and score highly by achieving 20 times the service life of their less expensive counterparts. Throughout this time, the operator never needs to be concerned with blunt saw blades, with all the replacement and changeover times that they entail. This makes work simpler, it cu...
Excellent cutting quality of plastic material can be achieved with the new sizing saw blade of LEUCO. Plastic materials can be processed without almost no cutting marks and, in many cases, it is no longer necessary to rework the visible edges.
For the innovation, LEUCO has developed the tooth geometry especially for plastic materials, particularly for many thermoplastics. The saw blades provide a close tooth pitch so that even very thin plastic panels can be processed with almost no cutting marks. LEUCO ...
Dividing laminated panels in best quality is the strength of the carbide-tipped Q-Cut G6 from LEUCO. This saw blade now achieves longer edge lives. The Q-Cut G6 is part of the Q-Cut family. What they have in common is the finish-cut quality.
Q-Cut G6 is a standard tool for horizontal panel sizing saws. The strengths of this saw blade become particularly apparent when laminated composite wood boards have to be divided. Individual panels or stacks up to a cutting height of 80 mm can be processed in perfect...
Thanks to its high productivity and the very long edge lives, the PowerTec is one of the most successful hogger manufactured by LEUCO. The most recent version in the airFace design has an even longer tool life. The constant cutting width and its usability for panel materials with different coatings are further benefits of the PowerTec.
Due to the suitability for high feed speeds and the long edge lives, the LEUCO PowerTec is one of the most established tool in the furniture and kitchen design industry. F...
The very first look at the new DIAMAX Z=1+1 shank-type cutters shows the special design of the tools. The relatively closed-looking round shape of the body and the seemingly puristic chip gullets stand out visually.
The redesigned body shape gives the tools even greater stability, which ensures a very smooth running and cutting behavior.
A closer look shows that the diamond tips of the new DIAMAX have larger shear angles than the previous tools in this LEUCO product family. The benefits for the end user...
Door production in the high-performance sector is often accompanied by short cycle times, high feed rates and the desire for long edgelife. This places the highest demands on drive spindles, clamping devices and tools on the CNC machine.
This also applies for the solid carbide lock case cutters used. Wear-resistant carbide, good chip removal and infeed movements and reverse paths, as gentle as possible guarantee long edgelife and contribute to minimizing the risk of breakage.
LEUCO now offers a solid ca...
LEUCO now also offers saw blades with tooth group configuration "G5" for joinery machines. They provide the typical advantages of this specific tooth geometry which include excellent cutting quality and significantly higher edge lives compared with the conventional saw blades. A further benefit : the new saw blade is equally suitable for sawing along the grain and transverse to the grain direction.
Tools with the g5-System achieve especially good sawing results due to their special geometry - a combinati...
In summer 2018, LEUCO received two awards in the "Machines & Engineering" area in the "Excellence in Business to Business (B2B)" competition category. The new "LEUCO nn-System" circular saw blade is the result of a number of innovations: on the one hand for its innovative woodworking cutter "LEUCO p-System" and on the other hand for the diamond-tipped circular saw blade "LEUCO nn-System".
Since its founding over 65 years ago, LEUCO has stood for innovative tools for the wood and plastics processing indus...
The wood-processing companies use an increasing variety of materi-als. The jointing cutter LEUCO DIAREX airFace is ideally suited for this challenge in the through-feed processing since, thanks to its cutting features, it has proven itself for a wide range of materials.
New materials entail new challenges for trade and industry. Nowadays, particle boards for kitchens and furniture, shop fitting and exhibition stand construction are provided with different top layers which include fire protection layers, ...
Despite the fact that they cost more to purchase than HW tools, it also makes sound financial sense to use DIAREX DP saw blades on table saws and on vertical panel ...
xcellent cutting quality of plastic material can be achieved with the new sizing saw blade of LEUCO. Plastic materials can be processed without almost no cutting ...
Sparkling Diamonds for a shiny design
The F/LIST GmbH is a worldwide operating company for exclusive interior fittings of business jets, yachts and residences. ...
Dividing laminated panels in best quality is the strength of the carbide-tipped Q-Cut G6 from LEUCO. This saw blade now achieves longer edge lives. The Q-Cut G6 ...
Thanks to its high productivity and the very long edge lives, the PowerTec is one of the most successful hogger manufactured by LEUCO. The most recent version in ...
Due to the introduction of the precise tool adapter HSK 32R, LEUCO and HOLZ-HER achieve a higher quality during jointing on edge banding machines. For these machines, ...
LEUCO now also offers saw blades with tooth group configuration "G5" for joinery machines. They provide the typical advantages of this specific tooth geometry which ...