10 - 14 May
LEUCO now also offers saw blades with tooth group configuration "G5" for joinery machines. They provide the typical advantages of this specific tooth geometry which include excellent cutting quality and significantly higher edge lives compared with the conventional saw blades. A further benefit : the new saw blade is equally suitable for sawing along the grain and transverse to the grain direction.
Tools with the g5-System achieve especially good sawing results due to their special geometry – a combination of a leading tooth and four consecutive teeth for fine machining. This tooth arrangement reduces the cutting pressure. Therefore, these saw blades provide a smooth and low-vibration running, the cutting edges are manufactured precisely. LEUCO has transferred this principle to its saw blades for joinery machines - with a diameter of up to 800 mm and 80 teeth.
Another advantage of the g5 saw blades for joinery machines is the long service life. During the tests, they usually achieved 30 percent longer edge lives. This can be reached thanks to the low cutting pressure due to the g5 serration. Moreover, the new saw blades can equally be used for ripping and cross cuts. Therefore, the same saw blade can be used for both cutting direction and must not be changed. Thus the carbide-tipped LEUCO g5-System is an all-rounder for joinery machines of all known manufacturers: high-quality cutting results, economically efficient thanks to long edge lives, suitable for sawing along the grain and transverse to the grain direction.
Silent and long edge life: The g5-System joining saw blade convinced test customers with the low noise level and the up to 4 times higher edge life. This saves time because the saw blade has to be changed less frequently.
It is not necessary to rework the accurate cuts which can be used as visible edges.
Tools for processing wood
On-site phone: +49 511 89405230
Despite the fact that they cost more to purchase than HW tools, it also makes sound financial sense to use DIAREX DP saw blades on table saws and on vertical panel ...
xcellent cutting quality of plastic material can be achieved with the new sizing saw blade of LEUCO. Plastic materials can be processed without almost no cutting ...
Sparkling Diamonds for a shiny design
The F/LIST GmbH is a worldwide operating company for exclusive interior fittings of business jets, yachts and residences. ...
Dividing laminated panels in best quality is the strength of the carbide-tipped Q-Cut G6 from LEUCO. This saw blade now achieves longer edge lives. The Q-Cut G6 ...
Thanks to its high productivity and the very long edge lives, the PowerTec is one of the most successful hogger manufactured by LEUCO. The most recent version in ...
Due to the introduction of the precise tool adapter HSK 32R, LEUCO and HOLZ-HER achieve a higher quality during jointing on edge banding machines. For these machines, ...
LEUCO offers the first grooving cutter with a cutting width of 8.5 mm for CNC machines. To obtain this width, a grooving cutter 5 mm and two passes have often been ...