27 - 31 May
The Special Milling Machine Stegherr BRF is used for the end processing of canvas stretcher bars. The machine can be manufactured in a fully automatic version with infeed magazine or in a more simple execution for manual feeding. In one single working cycle the workpiece is clamped and milled on the left and right side (tongue and groove). After milling the piece is released and can be removed for inserting the next workpiece.The machine is equipped with a workpiece recognition sensor which prevents the machine from starting when no workpiece is inserted. The BRF can be easily readjusted to milling different notching depths by using easily replaceable workpiece stops. The Stretcher Bar Milling Machine is also available in a Single-End Execution. This machine can mill at the same time two profiles (min. length 180 mm) placed one on top of the other.
The NC Mitre Saw STEGHERR type GLS-2 can
mitre-cut glass strips, water drainange channels or similar profiles of wood, aluminum or PVC at any angle between +45° ...
Profiled stock is normally coped in one working cycle - across the grain. This often results in tear outs that require time-consuming sanding and patching.
The NC Mitre Saw STEGHERR type GLS for profiled stock can mitre-cut glass strips, weather bars or similar profiles of wood, aluminum or PVC at any angle between ...
The FD-E2 machine is supplied with additional work stations, for:
- drilling dowel holes, incl. glue injection and dowel insertion
- drillings for hardware
The sash coping center type KF-1 is a special machine for the tear free coping of the work piece ends. With its two vertical milling spindles rotating in opposite ...
The KSS machine cuts V-notches in glass strips, water drainage channels or similar profiles of wood, aluminum, MDF or PVC at +/-45°. The saw blades are mounted at ...
The Coping Center type KF is a machining center for cutting to length, coping and drilling of window profiles for end scribed corner joints fastened with dowels ...
The KSF-2E machine can be provided with up to nine work stations. Beside the classic cross joint the machine can perform the following operations:
- End scribing ...