10 - 14 May
The NC Mitre Saw STEGHERR type GLS-2 can
mitre-cut glass strips, water drainange channels or similar profiles of wood, aluminum or PVC at any angle between +45° and -45°.
Speed adjustment of the working stroke over servo axis. Accurate positioning of the workpieces over a NC pusher. The cutter heads are positioned over servo axes at the angle stored in the machine program.
The machine can be upgraded to fully automatic operation by mounting customized workpiece conveyors. The machine is available with additional work units for punching, drilling, sawing and milling and ink jet or laser printers. Operator friendly machine program for easy operation both in the manual and the online mode.
Profiled stock is normally coped in one working cycle - across the grain. This often results in tear outs that require time-consuming sanding and patching.
The NC Mitre Saw STEGHERR type GLS for profiled stock can mitre-cut glass strips, weather bars or similar profiles of wood, aluminum or PVC at any angle between ...
The FD-E2 machine is supplied with additional work stations, for:
- drilling dowel holes, incl. glue injection and dowel insertion
- drillings for hardware
The sash coping center type KF-1 is a special machine for the tear free coping of the work piece ends. With its two vertical milling spindles rotating in opposite ...
The KSS machine cuts V-notches in glass strips, water drainage channels or similar profiles of wood, aluminum, MDF or PVC at +/-45°. The saw blades are mounted at ...
The Coping Center type KF is a machining center for cutting to length, coping and drilling of window profiles for end scribed corner joints fastened with dowels ...
The KSF-2E machine can be provided with up to nine work stations. Beside the classic cross joint the machine can perform the following operations:
- End scribing ...
The Special Milling Machine Stegherr BRF is used for the end processing of canvas stretcher bars. The machine can be manufactured in a fully automatic version with ...