27 - 31 May
The single piece production offers many advantages to increase productivity within all production steps, but the biggest leap can be achieved in the surface finishing. Here a high personnel input has always been necessary, moreover the variation of parts in window production is very high. Therefore only a highly automated solution is applicable.
Time-consuming setting of the Fentech is omitted, which is made possible by the automatic part recognition at the inlet of the machine and the subsequent motorized adjustment of all sanding units. All wood and wood-aluminum work piece shapes are detected and converted into a corresponding sanding program.
The work piece scanning calculates the part geometry and tells the aggregates in fractions of a second the basic position to move to. As soon as all units are in position, the work piece is released and sent through the machine.
Extra-large 400mm diameter sanding tools provide a maximized contact area with the work piece; a step-in and step-out control of the sanding heads ensures a gentle edge treatment and prolongs the life span of the abrasives. The 200mm high side aggregates, which are responsible for the visible surfaces of the window frames, have an optimized PLC controlled oscillating stroke. Taking into account the height of the part the stroke is always driven in a way that all sanding elements are fully used.
A novelty is the vacuum transport system, making it possible to send all kind of parts through the machine. Even short parts that previously could not be integrated in the sanding process, do not pose a problem anymore.
The customer has the option to operate the machine as continuously through feed machine, or enable a reversal automatism in the sanding program. In this case the parts are sent through the machine with about 20m/min for sanding and then returned back to the operator in rapid traverse of 60m/min. In this way a one-man operation is possible at any time.
Milling and sanding of furnitute parts
Lacquer sanding is a very difficult task in the field of production of furniture and furniture components. Many factors have an influence on a desired result and ...
Edge sanding on solid wood and MDF doors in furniture and interior design industry is a great challenge in terms of result and effectiveness. Straight or profiled ...
The new Roba BAT is a continuous milling machine for two-sided machining of furniture parts. The special construction with short overall length, scanner-based part ...
The innovative and patented Roba Belt is equipped with a new developed sanding belt, containing 138 brsuh sanding strips and provides a sanding area of approx. 700 ...
The innovative Roba-Tech 1300 is equipped with an brush sanding belt with exchangeable abrasive segments, what makes it possible to create a sanding surface of about ...
The new constructed Roba Anti Dust is a special development to be used in finishing lines. Dust residues under the lacquer layer are not repairable and create inevitably ...
Textured surfaces: A Hi Tech product.
Antique optics is up-to-date again: being sawed, stamped, planed, scraped or structured, the customers love the natural ...