27 - 31 May
Lacquer sanding is a very difficult task in the field of production of furniture and furniture components. Many factors have an influence on a desired result and only the combination of the correct aggregate and abrasives configuration, in conjunction with certain programmable sanding parameters can offer a perfect result.
MB Maschinenbau has bundled many years of experience in lacquer sanding in the Roba Split Belt line and developed a machine that meets these high expectations.
Based on the Roba Tech philosophy that only a large sanding area provides enough performance for best results, MB developed the Split Belt sanding aggregate. This combines the advantages of a large sanding area in contact with the work piece, while working with and against the part transport direction. An additional possibility to oscillate the split belt unit with up to 30 ° helps to optimize the result.
In conjunction with the for lacquer sanding optimized MB Superflex brushes, the Split Belt unit, placed at the machine exit, is responsible for the final finish in the longitudinal direction.
Since most work pieces need a cross processing to sand the millings transversal to the transport direction, as well as the right and left edges, two cross belt sanding units are placed at the machine entrance.
Having a processing width of 200mm each, the first cross unit works from right to left, while the second from left to right. This ensures a perfect sanding of all transversal grooves and longitudinal edges.
The combination of transverse and longitudinal sanding in one machine thus enables a smooth and effective processing in all areas.
On request the machine can be equipped with a pressure roller system and a cleaning aggregate at the machine end.
The single piece production offers many advantages to increase productivity within all production steps, but the biggest leap can be achieved in the surface finishing. ...
Edge sanding on solid wood and MDF doors in furniture and interior design industry is a great challenge in terms of result and effectiveness. Straight or profiled ...
The new Roba BAT is a continuous milling machine for two-sided machining of furniture parts. The special construction with short overall length, scanner-based part ...
The innovative and patented Roba Belt is equipped with a new developed sanding belt, containing 138 brsuh sanding strips and provides a sanding area of approx. 700 ...
The innovative Roba-Tech 1300 is equipped with an brush sanding belt with exchangeable abrasive segments, what makes it possible to create a sanding surface of about ...
The new constructed Roba Anti Dust is a special development to be used in finishing lines. Dust residues under the lacquer layer are not repairable and create inevitably ...
Textured surfaces: A Hi Tech product.
Antique optics is up-to-date again: being sawed, stamped, planed, scraped or structured, the customers love the natural ...