27 - 31 May
The sash coping center type KF-1 is a special machine for the tear free coping of the work piece ends. With its two vertical milling spindles rotating in opposite directions the KF-1 ensures tear free coping of already profiled stock.The working process is fully automatic on the fixed work piece. Pneumatic clamping. Expendable to ensure complete processing of SDL bars.The holes for dowels or other connection elements are made with an additional milling unit. Insert the clip into the SDL bar and the counter piece into the frame.In addition to the drilling unit, the machine can be equipped with a high pressure glue injection and a dowel insert station.
The NC Mitre Saw STEGHERR type GLS-2 can
mitre-cut glass strips, water drainange channels or similar profiles of wood, aluminum or PVC at any angle between +45° ...
Profiled stock is normally coped in one working cycle - across the grain. This often results in tear outs that require time-consuming sanding and patching.
The NC Mitre Saw STEGHERR type GLS for profiled stock can mitre-cut glass strips, weather bars or similar profiles of wood, aluminum or PVC at any angle between ...
The FD-E2 machine is supplied with additional work stations, for:
- drilling dowel holes, incl. glue injection and dowel insertion
- drillings for hardware
- millings ...
The KSS machine cuts V-notches in glass strips, water drainage channels or similar profiles of wood, aluminum, MDF or PVC at +/-45°. The saw blades are mounted at ...
The Coping Center type KF is a machining center for cutting to length, coping and drilling of window profiles for end scribed corner joints fastened with dowels ...
The KSF-2E machine can be provided with up to nine work stations. Beside the classic cross joint the machine can perform the following operations:
- End scribing ...