27 - 31 May
Two clean precision mitre cuts to an exact length in one machine cycle. When both pieces are to be joined together or in a frame, then they can be prepared with one or two dovetail slots in precise positions in the cut faces for jointing with Hoffmann Keys. Suitable for work-piece sizes maximum 90 x 90 mm. Hoffmann Key sizes W-1/2/3. Ideal for cutting profiles for glazingbeads, cornices, plinths etc. in wood, aluminium or plastic at 45°. It can also be used solely as a Double Mitre Saw, to cut to length profiles such as glazing beads, cornices plinths etc. in wood, aluminium, and plastic. At 45° angles.Function> The work-piece is laid on the table and positioned for cutting.> The start button is pressed to begin the machine cycle and the profile is clamped.> Both saw units cycle from above to make the mitre cuts.> The parts remain clamped whilst the tables open to allow the router units to rout one or two dovetail slots.> The machine tables close and the finished work-piece is removed.> The profile is fed through the machine till the cut face is against the digitally positioned fence stop. The next machine cycle begins.The measurement of the profile length is determined by manual positioning of the fence stop and reading the digital display. The sequence of the router units follows automatically.
The perfect Allrounder when it comes to mitred joints: Sawing, Routing and Drilling in one machine cycle. Wide ranging applications for windows, doors, frames as ...
NC based machine for preparing the frame and corner joints in buildingcomponents. E.g. in window and door production. This machine routers thedovetail slots (Hoffmann ...
Portable and flexible bench-top machine, for routing a single dovetail slot with each machine cycle. Hoffmann Key sizes W-1/2/3/4.FunctionPosition the work-piece ...