10 - 14 May
Saxlund have a long history and experience in the design and construction of screw conveyors. Today we manufacture four main types:Standard SAX ScrewsThese are shafted with flights fully welded to this shaft and no hanger bearings. These screws are used for all general applications and up to 10 m in length and 1000 mm in diameter. Flights can be any steel type according to the application. When stuffing boxes are fitted, the shaft always has an adjacent wear sleeve. Drives can be with chain wheels, shaft mounted or direct driven to clients request. Construction can be in mild steel or stainless.Shaft-less ScrewsThese are generally used for screws longer than 10 m and have their casing manufactured in 304 stainless steel. The casing is always lined with UHMWPE plastic material and they are driven by shaft mounted gear motors. Systems with vertical screw conveyors can be supplied.Ribbon ScrewsThese are generally used for special cases where the conveyed material is very sticky and may otherwise cause 'logging' in a standard screw. We use our ribbon screws for example in our ash conditioning mixer.
The SAXLUND International chain conveyor is a continous operating machine within a bolted rectangular cross-section casing. It may be arranged horizontally or inclined ...
This system is designed for the continous discharge of bulk materials from rectangular bunkers, large-diameter silos, and open air stockpiles. The TubeFeeder® gently ...
Another silo and bunker discharge machine offered by Saxlund International is the Hydraulic Rotor system. To start its operation slowly the rotor is actuated without ...
The Push Floor is an 'original' discharger design by Saxlund International for square and rectangular bunkers. It is designed to function with non free flowing and ...
The Sliding Frame is an 'original' discharger design by Saxlund International for flat bottom circular silos. It is designed to function with non-free flowing and ...