27 - 31 May
The Challenge range of shaft couplings incorporates the following industry standard models:FFX- Up to 14675 Nm torque on 6 pole motors- Up to 4° angular misalignment- Up to 12° 'wind up' shock absorption- Can accommodate simultaneous maximum misalignment in all planes- Tyre can be changed without moving prime mover or driven machine- Visual inspection of tyre to detect wear- Zero backlash makes the FFX ideal for reversing duties as the load carrying cords are wound in both directions. Reversing drives are not a problem- Steel clamping rings used throughout the range for superior tyre/clamping ring grip- Fire resistant and anti static (FRAS) tyres available- No lubrication required- Taper bush and pilot bore flanges availableHRC- Designed specifically for use with IEC motors- Torques up to 3150 Nm- Up to 1° angular misalignment- Good shock absorption properties- Quick and easy assembly- Taper bush and Pilot bore flanges available- High grade cast iron hubs- Fail safe operationRPX- Fully machined with curved jaw design. This reduces vibration and allows for increased shock loading- Designed to industry standard- High torque for size- Taper bore and pilot bore flanges- 92 shore (yellow) and 98 shore (red) elements availableNPX- Designed to industry standard- Available with three part flanges, thus allowing the segments to be changed without disturbing either the driving or driven shaft- High levels of torsional flexibility- High speed capability- Suit IEC electric motor applications- Taper bore and pilot bore flangesJaw- International design- Low cost wide range of sizes from 16 mm to 127mm diameterChain- High torque capacity- Bores from 12 mm to 150 mm diameter- Fully sealed casing with 'O' rings
Here's a Challenge: European conveyor chains manufactured in our dedicated plant in the industrialised east coast of China supplying a global market.
Choose Challenge ...
Challenge with its new and modern chain production offers a large range of various types.- Transmission, Conveyor, Agricultural, Leaf and many types of special chains.
The Challenge range of sprockets is produced from either C45 steel which can be both welded and hardened, or GG22 close grain cast iron.
All standard steel sprockets ...
Challenge produces a wide range of belts complying with ISO, BS, DIN and RMA standards
Challenge friction belts have been a mainstay of the industry for more than ...
Challenge pulleys are manufactured using either high-grade, close grain GG25 cast iron, forged steel or machined aluminium.
The Challenge range incorporates Vee ...
The Challenge range of shaft fixings is a ubiquitous but essential part of many drives. The closely machined tolerances employed ensure a perfect fit between the ...
Challenge shaft-mounted gearboxes are available in both metric and imperial versions and designed to industry standards.
Interchangeable with most manufacturers, ...
Three phase motors
- 2, 4, 6 and 8 pole up to 37 kW available complying to IEC 60034
- From frame size 56 to 200
- Manufactured from high-grade cast aluminium alloy ...
The Challenge range of hydraulic hoses meet or exceed EN, ISO, SAE and DIN specifications for each size.
Hoses in the range include:
1SN, 2SN, 4SP, 4SH, R3, R5, ...
The Challenge range of bearings consists of ball, roller and spherical bearings as well as plummer bocks and triple seal bearing units.
High quality materials are ...